led spike light advantage

1. OEM/ODM acceptable

2. Waterproof wire design ,prevent the water into the wire

3. Thickened aluminum board :2-3mm,super good heat dissipation,heat conductivity :2.0W/(m.k)

4. Integrated bead lens,uniform lighting without dazzling

5. Constant current power supply driver

6. Low voltage constant current power supply drive,efficiency ＞90% ,make sure the LED is

constant current working,the input voltage change no effect with the LED lifespan

7.SS316L material ,super good anti-corrosion

All passed 30 steps quality control , 100% waterproof at 10m depth, 8 hours LED aging test,100% inspection before deliver.

FAQS

How do I change the LED light in my pool?
Change the LED light in your pool by first ensuring that the power is disconnected to your

lighting system. Turn the power off from the mains and double-check by using the light switches.

Unscrew the light fitting, remove it from the pool wall and pull the fitting out of the water onto the

surround. Remove the cover of the light fitting and replace the light bulb. Refit the cover and ensure

that it is watertight before fitting back onto your pool.

Do pool lights use a lot of electricity?
The amount of electricity that your pool lights use will depend on their wattage. For example,

a 300W incandescent light used for 8 hours a day, 365 days a year will consume 876 kWh.

Whereas a 40W LED light used for the same time will only consume 116.8 kWh.

Do LED pool lights get hot?
LED pool lights do not get hot in the same way that incandescent bulbs do. There are no filaments

inside LED lights, so they produce much less heat than incandescent bulbs. This contributes to their

overall efficiency, although they may still get warm to the touch.